4 LOW COST WORKPLACE SAFETY MEASURES WITH BIG PAYOFFS
As the person in charge of workplace safety in your facility, you may be dealing with the proposed costs of implementing certain safety efforts, such as training and audits, and the impact on your allotted budget.
Below are workplace safety measures you can implement today that are both easy and cost-effective.
1) Educate Workers on Correct Posture
Manual handling, lifting, placing, carrying, holding and lowering account for many back injuries and other muscoskeletal disorders. These types of movements along with sitting for long periods can lead to injury.
Fortunately, many of these injuries are preventable through proper training and better job design. To prevent these injuries you should:
- Teach employees proper lifting techniques to prevent stress and strain on their bodies
- Encourage employees to work with a partner if necessary to lift heavier objects
- Put a maximum weight limit for any single lift, and create different percentiles of maximum weights for male and female workers
- Adjust the heights of pallets and shelves so that lifting occurs in the area between the shoulder and knee
- Remove obstructions that prevent an employee’s body from being able to easily contact the object being lifted
2) Safety Goggles For Workers in Hazardous Areas
Every day, an estimated 1,000 eye injuries occur and thousands of people are blinded each year from work-related eye injuries that could have easily been prevented with the proper protection.
It’s reported that 90% of eye injuries are preventable with proper protective eye wear.
Safety goggles offer good protection but must fit correctly and have the proper seal. In addition, be sure to check the goggles you have on hand for any scratches or marks that reduce vision and cause glare as this could contribute to workplace accidents.
3) Identify and Warn Workers of Trip Hazards
Slips, trips and falls still constitute the majority of workplace accidents and 15% of all accidental deaths.
Before the workday begins, scan the work area for any trip hazards and get rid of as many as possible. This prevents the chance of workers tripping and falling, resulting in fewer workplace injuries.
Look for loose flooring and carpeting, clutter, electrical cords, open desk drawers and filing cabinets. Keep walkways and stairs clear of scrap and debris and coil up extension cords, lines and hoses when not in use.
You should continuously work to ensure workers are aware and cautious of hazardous surroundings. This is a relatively free safety effort that has the potential to save many lives, so it’s worth the extra few minutes it takes to review work areas for hazards and relay them to your workers.
4) Gloves for Workers Who Need Hand Protection
Reports indicate that more than 25% of all workplace accidents involve hand and finger injuries. In 70% of hand injuries in manufacturing operations, workers were not wearing gloves.
Safety gloves protect worker’s hands from hazards such as harmful substances, severe cuts or lacerations, severe abrasions, punctures, chemical burns, thermal burns and extreme temperatures.
*Remember that the type of glove matters and should have performance characteristics that match the job. Gloves that are too bulky or loose could slow productivity or be hazardous around certain equipment.
Even though the above safety tips are low-cost solutions, they ultimately have big payoffs for the well-being of your workers and your company’s bottom line.
Take these steps today to help protect your employees from preventable injuries. Your employees and your business will benefit.
SHEBS has a nationwide network of expert EHS professionals who can provide the services and training you need to properly protect your employees and prevent injuries.
Have a Safe Day!
